Flux Cored Wire Mild Steel Flux Cored Mig Wire E71T – 1C 1.2mm 15kg SPOOL and 0.9mm 5kg

R437,74

Mechanical Properties (Typical – As Welded):

Property	Value
Tensile Strength	≥ 480 MPa (70 ksi)
Yield Strength	≥ 400 MPa (58 ksi)
Elongation	≥ 22%
Impact Toughness	≥ 27J at -30°C

Chemical Composition (Typical):

Element	Content (%)
Carbon (C)	≤ 0.12
Manganese (Mn)	1.4 – 1.75
Silicon (Si)	≤ 0.90
Sulfur (S)	≤ 0.035
Phosphorus (P)	≤ 0.030
Iron (Fe)	Balance

Packaging:

Diameter	Spool Weight	Type
0.9mm	5kg	Layer wound
1.2mm	15kg	Layer wound

Vacuum-sealed to prevent moisture
Packed in rugged spools for industrial use
Compatible with most standard MIG welders using flux-cored capabilities

Standards Compliance:

AWS A5.20 / E71T-1C
ASME SFA-5.20
EN ISO 17632-A: T 42 2 P C 1 H5

Storage & Handling:

Store in a dry, well-ventilated area
Use within packaging shelf life to avoid moisture pick-up
Avoid exposure to direct humidity or condensation

Order Information:

Product Name: Mild Steel Flux Cored MIG Wire – E71T-1C
Diameters: 0.9mm (5kg), 1.2mm (15kg)
Shielding Gas: 100% CO₂
Packaging: Sealed spools, ready for industrial use

SKU: E71T Category: Welding equipment and accesories

Description

Flux Cored MIG Welding Wire – Mild Steel – E71T-1C – 1.2mm (15kg Spool) & 0.9mm (5kg Spool)

Product Overview:

E71T-1C is a gas-shielded, flux-cored mild steel MIG welding wire designed for high-performance welding in all positions (including vertical-up). It delivers excellent mechanical properties, deep penetration, and a stable arc even in out-of-position welding, making it ideal for structural steel fabrication, shipbuilding, bridges, heavy equipment repair, and general mild steel construction.

This wire produces a slag-covered, smooth weld bead with minimal spatter, good arc stability, and excellent mechanical strength – ideal for CO₂-shielded welding.

Available Options:

1.2mm diameter – 15kg spool
0.9mm diameter – 5kg spool

Key Features:

✅ All-Position Welding (1G to 4G/1F to 4F)
✅ Deep Penetration & Excellent Arc Stability
✅ Smooth Bead Appearance with Easy Slag Removal
✅ High Deposition Rates for Faster Welding Speeds
✅ Suitable for Mild and Carbon Steel
✅ Works with 100% CO₂ shielding gas
✅ Excellent Impact Toughness at Low Temperatures

Applications:

Structural steel and general fabrication
Shipbuilding and offshore welding
Construction and bridge welding
Heavy equipment manufacturing and repair
Tank and pressure vessel welding
Pipe welding and frame assembly

Shielding Gas:

100% CO₂ (Carbon Dioxide) – Recommended for optimal performance
Flow Rate: 20–25 L/min

Welding Positions:

Flat, Horizontal, Vertical (up and down), Overhead