Mig Torch & Spares Tweco Type – Tweco Contact Tips #4 0.9mm Contact Tip (14H35), 1.0mm Contact Tip (14H40), 1.2mm Contact Tip (14H45), 1.4mm Contact Tip (14H52) and 1.6mm Contact Tip (14H116)
R17,94
Fit / Compatibility
-
These tips fit Tweco‑style #2 and #4 MIG guns.
-
The tips are threaded ¼‑28 UNF to mate with standard Tweco / WeldSkill / similar gun diffusers.
-
They are “heavy‑duty”—thicker body / wall of copper to absorb heat and resist wear.
Product Overview (common features)
These are “Heavy‑Duty” (14H series) contact tips for Tweco style #2 / #4 MIG welding torches. They are designed for use in high current MIG applications (up to ~400 A depending on size), and constructed to offer longer life & better thermal / electrical performance than standard tips. Key shared features:
-
Material: Copper alloy (often 122 DHP extruded or gun‑drilled copper tubing)
-
Thread: ¼‑28 UNF threaded style tip for Tweco #2 / #4 guns
-
Body / overall length: ~38 mm length; body diameter ~7 mm for many sizes.
-
Inside diameter tolerance: approx ±0.003 in (or similar small tolerance) to ensure smooth wire feed & consistent arc.
-
Marking: Part number & wire diameter stamped or otherwise clearly identified on the tip for quick identification.
Individual Sizes
Here are the details per part number, with wire sizes and approximate corresponding internal diameters (bore), plus other specs as available.
| Part No. | Wire Size (mm & inch) | Approx Bore (ID) | Typical Use | Notes / Other Dimensions |
|---|---|---|---|---|
| 14H‑35 | 0.9 mm (~0.035 in) | ~0.044 in ≈ 1.12 mm | Light to moderate current, good for thinner wires around that size. | Thread ¼‑28 UNF; length ~1.47 in (≈ 38 mm). |
| 14H‑40 | 1.0 mm (~0.040 in) | ~0.049 in ≈ 1.25 mm | Slightly heavier wire / higher current than 14H‑35. | Same general geometry (thread, length) as for 14H‑35. |
| 14H‑45 | 1.2 mm (~0.045 in) | ~0.054 in ≈ 1.37 mm | For more demanding welds, thicker wire, higher current. | Heavy duty section thicker walls. |
| 14H‑52 | Typically for ~1.3‑1.4 mm wire (approx .052 in) | ~0.064 in ≈ 1.63 mm | Heavier current applications, larger wire sizes. | |
| 14H‑116 | ~1.6 mm wire (≈ 1/16 in) | ~0.073 in ≈ 1.85 mm | For thick work, high current welding, or where heavy deposit is needed. |
Related products
Welding equipment and accesories
Tig Torches – WP-17 4M TIG Torch with switch – 2 Pc each and WP-17 8M TIG Torch with switch – 2 Pc
Welding equipment and accesories
Welding equipment and accesories
Welding equipment and accesories
Tip Adaptors Tip Adaptor MB15 X M6, MB25 X M6, MB36 X M6, MB36 X M8, MB40 X M8, MB501 X M8 and RB61
Welding equipment and accesories
Tweco Gas Diffuser/Tip Adaptor – Tweco #4 Gas Diffuser (54A) and #5 Gas Diffuser (55)
Welding equipment and accesories
Tig Torches – WP-26V 4M TIG Torch – 2 Pc and WP-26V 8M TIG Torch – 2 PC
Welding equipment and accesories
Welding equipment and accesories