Tig Torches – WP-26V 4M TIG Torch – 2 Pc and WP-26V 8M TIG Torch – 2 PC

Name: Tig Torches – WP-26V 4M TIG Torch – 2 Pc and WP-26V 8M TIG Torch – 2 PC
SKU: WP-26V 4M TIG Torch &#8211; 2 Pc/ WP-26V 8M TIG Torch &#8211; 2 PC
Availability: InStock

R1 121,25

Technical Specifications (Typical / Representative)

Here are typical specs based on supplier & product listings:

Spec	4M Model	8M Model
Cooling Type	Air‑cooled	Air‑cooled
Gas Valve	Yes (manual)	Yes
Rated DC Current	~ 200 A DC
Rated AC Current	~ 160 A AC
Duty Cycle	~ 35% typical at those currents
Electrode Sizes Supported	~0.5 mm up to ~4.0 mm tungsten
Connector Type	Power & gas separate; likely Dinse‑type or other standard plugs and fittings per supplier

Applications & Use‑Cases

Heavy TIG welding tasks: thicker materials, demanding duty cycles, structural work, fabrication.
Fabrication shops, maintenance, industrial workshops, where longer reach (8 m) may be needed.
Jobs requiring direct gas control at the torch (e.g. when using machines without built‑in solenoids).
Situations where robustness is needed: electrode switching, high amperage, constant duty.

What’s Included / Optional Consumables

Torch head with valve
Power cable + gas hose (2‑piece) in the chosen length (4 m or 8 m)
Standard collet (often 2.4 mm) or set of collets depending on supplier
Back caps, ceramic cups / nozzles may come with starter kits or be optional
Connectors/fittings for gas hose and power cable matching standard industry types

Compatibility & Maintenance Notes

Ensure welding machine can deliver stable current close to the rated amperage (200 A DC / ~160 A AC) so you aren’t throttled.
Cable length (especially for 8 m) may introduce voltage drop; ensure cable sizes and connectors are appropriate to avoid heat buildup or loss of performance.
Use proper tungsten size for the current you’ll run; using too small tungsten for high amps can cause overheating or instability.
Keep ceramic cup / nozzle clean; deposits reduce gas shielding and weld quality.
Regularly inspect gas hose & power cable for wear, especially at flex points, connector ends.

SKU: WP-26V 4M TIG Torch – 2 Pc/ WP-26V 8M TIG Torch – 2 PC Category: Welding equipment and accesories Tags: 2-piece TIG torch, 4m TIG torch, 8m TIG torch, air-cooled TIG torch, heavy-duty TIG torch, high amperage TIG torch, manual gas control TIG, TIG torch with valve, WP-26V TIG torch, WP26 torch

Description

WP‑26V TIG Torches – 4M & 8M | 2‑Piece Air‑Cooled with Valve

Heavy‑duty WP‑26V TIG torches built for demanding TIG welding applications. These torches are air‑cooled, feature a manual gas valve (“V” style) for direct gas control, and are supplied in a 2‑piece cable/gas hose setup for easier maintenance. Available in 4‑metre and 8‑metre lengths to suit different workspace requirements.

Key Features & Advantages

Feature	Benefit
Built‑in Gas Valve	Allows manual control over gas flow at the torch — useful if your welding machine does not include a gas solenoid or you prefer direct control.
Air‑Cooled Design	Easier to maintain, lighter torch, no need for water cooling systems.
Two Cable Length Options: 4 m & 8 m	4 m gives maneuverability and less cable drag; 8 m gives extra reach for large workpieces or large work areas.
2‑Piece Power & Gas Lines	Separating power cable and gas hose makes it easier to replace worn components without replacing whole assembly; also helps with cable routing and reduces heat stress on connections.
Rugged Build	Designed for higher currents; heavier gauge cables/hose, thermally durable materials, larger electrode capacity.