Tig Welding Wire Mild Steel Tig Wire TIG WIRE ER70S – 6 1.6mm, 2.0mm, 2.4mm and 3.2mm 5kg’s

R224,25

Shielding Gas:

100% Argon (Ar) recommended for TIG welding
Flow rate: 8–15 L/min (as per setup)

Mechanical Properties (Typical – As Welded):

Property	Value
Tensile Strength	≥ 490 MPa (70 ksi)
Yield Strength	≥ 400 MPa (58 ksi)
Elongation	≥ 22%
Impact Toughness	≥ 27J at -30°C

Chemical Composition (Typical):

Element	Content (%)
Carbon (C)	≤ 0.10
Manganese (Mn)	1.4 – 1.85
Silicon (Si)	0.8 – 1.15
Phosphorus (P)	≤ 0.025
Sulfur (S)	≤ 0.035
Copper (Cu)	≤ 0.50 (coating)
Iron (Fe)	Balance

Packaging:

Supplied in 5kg packs
Straight-length rods, approx. 1 meter long
Vacuum-sealed tubes to prevent rust or moisture exposure
Clearly labeled by size and AWS classification

Standards:

AWS A5.18 / ER70S-6
ISO 14341-A – G 42 4 C1/M21 3Si1

Storage & Handling:

Store in a dry, clean area
Keep sealed until ready to use
Wear gloves when handling rods to prevent contamination

Order Information:

Product Name: Mild Steel TIG Welding Wire – ER70S-6
Diameters: 1.6mm, 2.0mm, 2.4mm, 3.2mm
Pack Size: 5kg tubes
Process: TIG (GTAW)
Shielding Gas: 100% Argon

SKU: ER70S Category: Welding equipment and accesories Tag: ER70S-6 TIG welding wire Mild steel TIG wire ER70S-6 TIG welding rods for mild steel ER70S-6 TIG filler rod 5kg TIG wire mild steel Buy ER70S-6 TIG welding wire Mild steel TIG filler wire

Description

TIG Welding Wire – Mild Steel – ER70S-6 – 1.6mm, 2.0mm, 2.4mm, 3.2mm (5kg Packs)

Product Overview:

ER70S-6 TIG welding wire is a copper-coated mild steel filler rod designed for high-quality TIG (GTAW) welding of carbon and low-alloy steels. Known for its high deoxidizer content (manganese and silicon), this wire provides excellent weld puddle fluidity, superior arc stability, and minimal spatter, even when welding over slightly rusty or contaminated surfaces.

It’s ideal for general-purpose fabrication, pipe welding, structural steel, pressure vessels, automotive, and maintenance work — delivering strong, clean welds with excellent mechanical properties.

Available Diameters (All in 5kg Packs):

1.6mm
2.0mm
2.4mm
3.2mm

Key Features:

✅ Copper-Coated Finish for smooth feed and corrosion resistance
✅ Excellent Arc Stability and Weld Appearance
✅ High Deoxidizer Content (Mn & Si) – welds through mill scale and rust
✅ Low Spatter and Clean Bead Profile
✅ All-Position Capable – Ideal for manual TIG welding
✅ Consistent Diameter for Precise Control
✅ Vacuum-Packed in 5kg Tubes for moisture protection

Applications:

Pipe and tube welding
Structural steelwork
Pressure vessels and tanks
Automotive and transportation components
Fabrication of mild and carbon steel assemblies
Maintenance and repair welding

Compatible Base Materials:

Mild steel and carbon steel
AISI/SAE 1010, 1018, 1020, 1045
Equivalent unalloyed steels