AIR REGULATOR WITH GAUGE 1/4″3/8″1/2″3/4″1″ Air Regulator with Gauge

R1 094,48

Spec	Value
Max inlet pressure	Around 150–175 psi (~1.0–1.2 MPa)
Operating range	0–150 psi (≈0–1.0 MPa); some up to 200 psi
Port sizes supported	¼″, ⅜″, ½″, ¾″, 1″ (varies by model)
Gauge range	0–150 psi (dual‑unit psi/bar or MPa)
Knob control	Plastic or metal knob, often with locking mechanism
Filter rating	5–40 μm (combos include water/oil separators)
Materials	Brass, zinc alloy, aluminum alloy, plastics
Accessories	Bracket, drain valve, fittings (e.g. ¼″ NPT), Teflon tape

Adjustable pressure range typically from 0 up to ~150–175 psi (≈1.0–1.2 MPa).
Regulation is achieved by lifting and turning the top knob: clockwise increases outlet pressure, anticlockwise decreases it. Many models include a lock‑down knob to prevent accidental shift.

Models commonly support ¼″ NPT (or BSP) threads; some versions include multiple ports: e.g. two inlet/outlet + one gauge port sized ¼″ or ⅛″.
Larger sizes like ⅜″, ½″, ¾″, and 1″ are available in industrial-grade versions — these often come in filter-regulator combos.

Typically features a dial gauge with range 0–150 psi (or up to 175 psi in some).
Dual‑scale gauges include psi and MPa/bar.
Gauge port threads are commonly ⅛″ NPT (or BSP) for standardization.

Bodies constructed from brass, aluminum alloy, or composite metals and plastics.
Gauge often protected by a metal housing or face; bowl guards or brackets for mounting may be included.

In filter-regulator versions, a 5–40 μm filter or water‑trapping system removes moisture, oil, and particulates, typically draining via a manual valve.