Rotary Hand Lever Valve 5/3 Way 1/4″ Closed Centre-Detented and Rotary Hand Lever Valve 5/3 Way 1/2″ Closed Centre-Detented

Full Descriptions

1. Rotary Hand Lever Valve 5/3‑Way 1/4″ Closed Centre‑Detented

Configuration & Construction:

• Function: 5-port, 3-position manual directional valve (P, two work ports, two exhausts), with closed centre and detent (locks lever in each position).

• Port Size: BSPP G 1/4″ (or NPT 1/4″ depending on design).

• Materials: Aluminum body with aluminum or die-cast construction; internal spool / slider also aluminum; seals usually NBR (Buna‑N).

• Operating Pressure: Typically 0–8 bar (0–116 PSI) depending on make.

• Temperature Range: Roughly -5 °C to +60 °C (or broader in some models).

• Flow Rate / Nominal Diameter: Approx. nominal width 3.9 mm with a flow capacity around 600 l/min.

• Operation: Manual lever with detent, center position closed (all ports blocked), ensuring actuator holds its position when lever is released.

2. Rotary Hand Lever Valve 5/3‑Way 1/2″ Closed Centre‑Detented

Configuration & Construction:

• Function: Same 5/3‑way closed‑centre detented operation.

• Port Size: BSPP G 1/2″ (or equivalent NPT).

• Materials & Seals: Aluminum body, NBR seals, robust spool materials for durability.

• Operating Pressure: Around 0–8 bar (check manufacturer for exact).

• Flow / Nominal Width: Nominal width approx. 6.2 mm, suitable for higher flow demand.