SELFTAPPING SCREWS Pan Combi Size 4 x 6.5 to 12 x 50 Per Pack of 100

R8,05

These conform typically to DIN 7981 for Pan head combination self‑tapping screws. Common finishes include zinc plating or stainless.

Widely used in sheet metal fabrication, light gauge structural assembly, fastening plasterboard, wood-to-metal, or plastic components.
Very often used in electrical boxes, appliance casing, or DIY projects requiring high thread retention and no nuts.

Product Overview: Pan Combi Self‑Tapping Screws (#4 to #12, 6.5 – 50 mm)

Featuring a pan head with integrated washer flange (Pan Combi): ideal for increased loading and surface contact.
Designed as self‑tapping screws: capable of cutting their own thread into softer metals, plastics or wood, typically requiring a small pilot hole for sizes using a Type‑B blunt tip.
Often made of zinc‑plated high‑tensile steel (grade ~4.8), sometimes stainless steel depending on supplier. Zink plating or black/yellow passivation for corrosion resistance.

Available in gauge sizes from #4 (≈ 2.9 mm) up to #12 (≈ 5.5 mm) in diameter.
Length options typically span 6.5 mm up to 50 mm. The sizes you mention, from 4 × 6.5 through to 12 × 50, lie well within standard ranges.
Common size breakdown seen in kits (e.g. No. 4 = 2.9 mm × 16/19/25 mm; No. 6 = 3.5 mm × 16–30 mm; No. 8 = 4.2 mm × up to 38 mm; No. 10 = 4.8 mm × 16–50 mm; No. 12 = 5.5 mm × 19–50 mm).

Parameter	Description
Head Type	Pan Combi (Pan head + washer flange)
Drive Type	Typically Pozi‑drive (combination head)
Diameter (Gauge)	#4 (≈ 2.9 mm), #6 (≈ 3.5 mm), #8 (≈ 4.2 mm), #10 (≈ 4.8 mm), #12 (≈ 5.5 mm)
Length Range	From 6.5 mm up to 50 mm
Material/Finish	Steel (Zinc‑plated / black slip / yellow passivated), sometimes stainless
Thread Type	Self‑tapping, type‑B (pilot hole needed)
Standard	DIN 7981 compliant
Common Use Cases	Wood, plastic, sheet metal fastening