Pop Rivets AS Series from 2406 – 6430 (Packs of 100)

R12,65

Summary Table of AS Rivet Codes (Approximate)

Code (AS‑xxxx)	Diameter × Length (mm)	Grip Range (mm)	Hole Drill Size (mm)
AS‑2406 / 2408 / 2410	2.4 × 6–10	~0.5–8.0	~2.5
AS‑3206 – AS‑3227	3.2 × 6–27	~0–22.5	~3.3
AS‑4006 – AS‑4027	4.0 × 6–27	~0–22.0	~4.1
AS‑4806 – AS‑4840	4.8 × 6–40	~1.5–29.5	~4.9

✅ Features & Uses

Material: Aluminium body with steel mandrel—lightweight and moderately strong
Head Styles: Dome (standard) or available in countersunk style under ASC (e.g. AS‑4010C) for a flush finish
Pack Size: Usually sold in packets of 100 units
Applications: Joining thin sheet metal, plastic, leather, wood; ideal where access is only from one side; commonly used in automotive trim, canopy fittings, general fabrication

SKU: AS Rivet Category: Fastners Tags: Aluminium-Steel Blind Rivets South Africa, AS 2406 to AS 6430, Pop Rivets AS Series

Description

AS-Series Aluminium‑Steel Blind Rivets

These are dome‑head blind rivets featuring an aluminium body and steel mandrel, suitable for applications where corrosion resistance and light‑duty fastening are needed. They require access to only one side of the joint and are installed using a pop‑rivet (blind‑rivet) gun

Available Codes & Typical Dimensions

Here’s an overview of the most common AS sizes:

AS 3206 to AS 3227 (3.2 mm diameter rivets)

Lengths: 6 mm, 8 mm, 10 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 27 mm
Grip range varies from approximately 0–22.5 mm depending on length
Hole size ~3.25–3.35 mm; use 3.3 mm drill bit
Codes like AS‑3206 = 3.2×6 mm, AS‑3224 = 3.2×24 mm, etc.

AS 4006 to AS 4027 (4.0 mm diameter rivets)

Lengths: 6 mm to 27 mm
Grip range ~0–22 mm depending on length
Hole size ~4.05–4.15 mm; use 4.1 mm drill bit
Codes like AS‑4010 = 4.0×10 mm, AS‑4021 = 4.0×21 mm, etc.

AS 4806 to AS 4840 (4.8 mm diameter rivets)

Lengths: 6 mm up to 40 mm
Grip range ~1.5–29.5 mm depending on length
Hole size ~4.85–4.95 mm; use 4.9 mm drill bit
Codes like AS‑4815 = 4.8×15 mm, AS‑4840 = 4.8×40 mm, etc.

📌 What About “AS 2406” to “AS 6430”?

AS 2406, and similar codes like AS 2408 and AS 2410, refer to 2.4 mm diameter aluminium‑steel dome head rivets with body 2.4 mm and lengths 6 mm, 8 mm, or 10 mm. These come with a steel mandrel and are listed under dome‑head AS series rivets in some manufacturers’ catalogs
AS 6430 does not appear in standard listings; for 6.4 mm diameter rivets (similar to “AS‑6406” etc.), these may be part of larger industrial catalogs but are less commonly stocked by South African suppliers. Some global manufacturers do list 6.4 mm AS‑series, although name codes may vary, and grip range goes up to ~28–35 mm depending on exact size.