POLYETHYLENE 1100L DOUBLE IBC SPILL DECK UP TO 1100L IN CATCHEMENT
R32 976,25
THE ONLY LOCAL MANUFACTURER IN AFRICA.
- Polyethylene 1100L Double IBC Spill Deck.
- Made From 100% Recyclable Polyethylene.
- Central Supports Always To Be Used When Decks In Place.
- Easy To Maintain And Clean.
- Compatible With Most Forklifts And Pallet Trucks.
- Remove Flowbin And Empty Pallet Before Moving.
- Solid Construction & Ergonomic Design.
- Dimensions: 2866mm(L) X 1495mm (W) x 520mm (H)
- 1100L Catchment bund dependant on the viscosity of the liquid
- Fully 110% Compliant Capacity
- Deck Must Always Be Placed On A Flat Solid Surface/Floor
** FLOWBINS NOT INCLUDED – ILLUSTRATION PURPOSES ONLY*
Hydrocarbons can only be stored in designated areas where potential spillages could be contained and quarantined to prevent contamination of the environment e.g. use of permanent bunding and/or drip trays with sufficient capacity.
Product Overview
-
A spill containment deck (bund) made from 100% recyclable polyethylene.
-
Designed for use under one or more IBCs (Intermediate Bulk Containers), typically up to ~1 100 L capacity. The catchment (bund) itself holds sufficient volume to contain spills.
Key Features
-
Material: Polyethylene, UV resistant, corrosion resistant, chemical resistant.
-
Design:
-
Solid, ergonomic structure.
-
Compatible with forklifts and pallet trucks; designed so that empty or removed IBC/pallet is taken off before moving.
-
Cleanable and maintainable: easy to wash out spills, optionally with grates or lids in some models.
-
-
Safety / Compliance:
-
Full 110% capacity bunding: meaning the bund can hold at least 110% of the volume of the largest IBC stored on it. This is to satisfy many municipal/by‐law/SANS / environmental and health & safety regulations.
-
Flat, solid surface requirement: the deck/bund must be placed on a stable, level floor.
-
Specifications
| Property | Value |
|---|---|
| Catchment Capacity | ~ 1 100 litres (bunded) to accommodate spill containment. |
| External Dimensions | ~ 1 499 mm (Length) × 1 499 mm (Width) × 825 mm (Height) for some versions; other suppliers offer variations. |
| Weight (deck & lid etc.) | ~ 94 kg for one of the local SA units. |
| Material Recyclability | Fully recyclable polyethylene. |
Usage Instructions & Notes
-
Remove the IBC and empty the deck/pallet before moving with forklift/pallet truck.
-
Always use all supports/central supports when the deck is in place.
-
Must be placed on a flat, solid surface/floor. Uneven or soft ground may compromise containment.
Almost all SANS and Municipal by-law regulations require a holding capacity of 110% of the largest tank within the bund or 25% of the total capacity of all the tanks within the bund whichever is the greatest. In addition further International Best Practices & SHEQ Policy & Procedure recommend additional measures such as providing sufficient height of wall above the maximum holding capacity to accommodate dynamic factors (EG: Accidental rupturing or puncturing of a flow bin or IBC). As a rule (and unless specific local laws prevail) most operators work to the 110% capacity
Related products
Spill Kits
Spill Kits
Safety Equipment
Spill Kits
Drums 210L Steel
Safety Equipment
Safety Equipment