HIGH DENSITY POLYETHYLENE (HDPE) OUTER DIAMETER Class 8 100m

Product: Class 8 HDPE Pipe – 100 m Coil

✅ Material & Pressure Rating

• Made from PE100 virgin high-density polyethylene

• Class 8 corresponds to PN 8 bar nominal pressure rating (≈8 bar or ~116 psi)

• Suitable for drinking water, irrigation, and industrial applications

🔄 Coil Format & Length

• Standard packaging: 100 m rolls (some suppliers may also offer 50 m coils)

• Flexible for trenchless installation, reducing jointing

📏 Diameter & Wall Thickness

• Available in a wide range of outside diameters: from ~20 mm to 200 mm (and larger via catalogue order)

• Wall thickness varies with OD and SDR:

  • Example: 110 mm OD, PN 8 (SDR ~11), wall thickness around ~6 mm

  • For 160 mm OD, average thickness about 6.15 mm

✔️ Standards & Certification

• Complies with ISO 4427 and EN 12201 for water supply systems

• Some sources list both PE63 and PE100, but Class 8 is most commonly produced in PE100

• Typical Applications & Notes

  • Primary uses: household potable-water reticulation, low- to medium-pressure irrigation, compressed air lines

  • Flexible coil format: ideal for trenching and directional drilling with minimal joints.

  • Joining methods: butt fusion or electrofusion recommended for leak-proof connections

  • UV-resistance: naturally resistant, but keep stored coils protected until installation

  • Our quality Polythylene Pipe has a WARRANTY of 3 year for usage above ground and 5 years underground.
    Damage caused by impact, abuse, negligence, tampering and modification are not covered by the warranty.
    The warranty is one of replacement of defective pipe. It does not include transport, labour and other expenses